Owner's Manual

450
Figure 13-26. COS Rewrite Rules Panel
Use the Add, Edit and Remove buttons to manage rows in these tables. When you Add or Edit a
selected rewrite rule, the lower panel lets you edit that rule’s properties. Click
Apply to accept your
edits and make the rewrite rule part of the table in the upper part of the screen. Click
Cancel to
abandon your edits. The editor portion of the screen has the following fields:
Rewrite Rule Properties
Name —Any name length 64 characters or less.
Traffic Type — dscp, exp, ieee-802.1 , inet-precedence or dscp-ipv6.
Forwarding Class
These classes are class defined in Class of Service -> Forwarding Classes on page 445. Select a class/
loss priority combination from those listed on the left, then check the matching code point (the list
changes depending on the
Traffic Type you select. Rewrite rules can have only one code point
associated with each combination. Code points are defined and retrieved from the screen described
in Class of Service -> Code Points on page 444.
The
Configure button executes the desired configuration on the selected equipment.Click the
Refresh button to re-query for these items.