Owner's Manual

448
Figure 13-24. COS Scheduler Panel
Use the Add, Edit and Remove buttons to manage rows here. Click Apply to accept your edits, or
Cancel to abandon them. When you Add or Edit a selected schedule, the fields appearing in the
lower panel are the following:
-
Name —Any valid name up to 64 characters.
-
Transmit Rate —0 to 100 percent.
-
Buffer Size —Remainder (no value needed), percent (0-100) or temporal (1-200000)
-
Transmit Rate — rate (1-32000000000), percent (0-100), remainder (no value needed) or exact
(enforce the exact transmission rate). Under sustained congestion, a rate-controlled queue
that goes into negative credit fills up and eventually drops packets.
-
Priority — Low, medium-high, medium-low, strict-high or high .
-
Drop-Profile —Drop profile defined in Drop-Profiles Screen. (See Class of Service -> Drop
Profiles on page 446).
-
Protocol — any, non-tcp or tcp.
- Loss Priority — any, low or high.
The Configure button executes the desired configuration on the selected equipment.Click the
Refresh button to re-query for these items.