Owner's Manual

446
Click Add to create a new property, or select one from those listed and select Edit. Click Delete to
remove selected properties. Click
Export to save a description of the listed items to a file. Click
Apply to accept your edits, or Cancel to abandon them. The Forwarding Class Properties panel has
the following fields:
Forwarding Class Properties
- Queue Number —0 - 3
-
Class Name —Each queue can have only one unique name.
The
Configure button executes the desired configuration on the selected equipment.Click the
Refresh button to re-query for these items.
Class of Service -> Drop Profiles
This panel manages COS drop profiles. Dropped packets must match the drop profile. When a
packet arrives, RED checks the queue fill level. If the fill level corresponds to a nonzero drop
probability, the RED algorithm determines whether to drop the arriving packet.
Figure 13-23. Drop Profiles
Drop Profiles are associated with the forwarding classes and loss priorities from the scheduler-map
you configured on the interface. (see Class of Service -> Scheduler Maps on page 449). In this
configuration, you can select either the discrete or interpolated. If you do not check
Interpolate,