Owner's Manual

444
Click Apply to accept your edits, and Cancel to abandon them. The Configure button at the
bottom of these screens executes the desired configuration on the selected equipment.Click the
Refresh button to re-query for these items.
Class of Service -> Code Points
This panel displays the available code points defined on the device. It also lets you create new code
points.
Figure 13-21. Code Points
Click Add to create a new code point, or select one from those listed and select Edit. Click Delete
to delete selected code points. Click
Export to save a description of the listed items to a file. Click
Apply to accept your edits, or Cancel to abandon them. The Code Point Properties panel has the
following fields:
Code Point Properties
- Alias Name —A code-point alias is a name you assign to a set of DiffServ code point and DSCP
IPv6 bits. When you configure classes and define classifiers, you can refer to the code points
by these alias names. You can configure user-defined classifiers in terms of alias names. If the
value of an alias changes, it alters the behavior of any classifier that references that alias.
You use code-point aliases to do the following:
• Define an alias for bits that currently have no alias
• Define multiple aliases for the same bits
• Redefine an alias name to mean a different set of bits than the default