Owner's Manual
440
-
Interface service
—The service set retains the input-interface information even after services are
applied, so that functions like filter-class forwarding that depend on input-interface
information continue to work. You must specify a
Service Interface
if you select this option.
-
Next-Hop service
—The service set is a forwarding next hop. Useful when services need to apply
to an entire VRF or when routing decisions determine that services need to occur. You must
specify an
Outside Interface
and an
Inside Interface
if you select this option.
Syslog
Check the
Enable Syslog
box to activate this. Here, you can also configure system log messages
generated for the service-set.
-
Hostname
—Name a target logging host.
-
Log Prefix
—The address prefix for all logging to the system log host.
-
Priority
—The level for system log messages (
alert
, and so on) and a Facility (authorization, and
so on).
-
Facility
—Override the logging to a particular facility. Types:
authorization, daemon, ftp, kernel,
user, local 0 - local 9.
Service Set Information
Yo u c an
Add
or
Remove
these with the button on the right. Select a
Ty p e
(
IDS Rule
,
Stateful
Firewall,
and so on), and further specify (
IDSRule2
,
FirewallRule1
, and so on), if necessary. This
specifies the rules and rule sets that constitute the service set. See Unit Services on page 607 for
more about services.
Click
Apply
to accept your edits, and
Cancel
to abandon them. The
Configure
button at the
bottom of these screens executes the desired configuration on the selected equipment.Click the
Refresh
button to re-query for these items.
Aggregated Devices -> Device Options
The IEEE 802.3ad standard defines link aggregation of Ethernet interfaces. The JUNOS
implementation of 802.3AD balances traffic across the member links within an aggregated
Ethernet bundle based on the Layer 3 information carried in the packet. This implementation uses
the same load balancing algorithm used for per-packet load balancing The
Device Options
screen
controls device options for Aggregated Devices.