Owner's Manual
416
6
Select the
Level 1
tab
7
Enter an Authentication Key, for example,
MyKey
8
Select authentication type. For example,
Simple Password Authentication
9
Click
Configure
10
Open Discrete Config -> configure -> Protocols -> ISIS interfaces
11
Click
Add
12
Enter Name:
all
13
Check
Active
14
Select the
Level 1
tab
15
Enter the
Hello Auth Key
: MyKey, and
Hello Auth type
: Simple Password Authentication
16
Click
Apply
and
Configure
17
For the “B” equipment, perform the same steps as above described with different data