Owner's Manual

407
Zone -> Manage Zone Sets
This screen manages zone configurations for the selected device. The maximum number of items
that can be stored in the zoning configuration depends on the switches in the fabric.
Figure 13-7. Zone -> Manage Configs
Click New Zone Set to add a configuration to the pick list at the top of this screen, or select a
member of that list to modify an existing Zone Set. Select a configuration and click
Delete or Copy
to remove or copy a listed configuration. Click Configure to send this configuration to the device,
or
Refresh to update the information.
Check
Effective Zone Set to make the selected Zone Set the one in effect. A read-only reminder of
which is the effective Zone Set appears in the upper right corner of this screen.
Member Selection List / Zone Set Members
Click the right arrow to send selected Zone to the selected set (those on the right). Actions
configured in this screen, reconfiguring, adding or deleting members, appear listed in the
Pending
Changes
panel at the bottom of this screen (you may have to click and drag the divider to see this
panel). They do not take effect until you Click
Configure.
Click Configure to send this configuration to the device, or Refresh to update the information.