Owner's Manual

406
Zone -> Manage Zone
This screen manages ports in zones for the selected equipment.
Figure 13-6. Zone -> Manage Zone
A Zone is a region within the fabric, where switches and devices can communicate. A device can
only communicate with other devices connected to the fabric within its specified zone. The
members of a zone are determined using the following methods:
•Alias names
• Switch domain and port area number pair.
•WWN
Click
New Zone to add a zone to the pick list at the top of this screen. Select one on the list to
modify an existing zone. Select a zone and click
Delete to remove a listed zone, or click Copy or
Rename to perform those functions on the selected zone.
Actions configured in this screen, reconfiguring, adding or deleting members, appear listed in the
Pending Changes panel at the bottom of this screen (you may have to click and drag the divider to
see this panel). They do not take effect until you Click
Configure.
Member Selection List / Zone Members
Click the right arrow to send selected Ports to Ports in the zone (those on the right). Click
Configure to send this configuration to the device, or Refresh to update the information.