Owner's Manual

404
SNMP -> Settings
This screen manages SNMP settings for the selected equipment.
Figure 13-4. SNMP -> Settings
This screen has the following fields and settings:
Edit SNMP agent Settings
- Event Trap Level (min) —Select the minimum trap level from the pick list. The equipment
sends traps of this level or higher.
-
Enable Authentication Traps —Check to enable.
-
Track config changes —Check to enable.
Read Write Communities
This panel lists three trap community string settings and the trap recipient IP Address.
Read Only Communities
This panel lists three trap community string settings and the trap recipient IP Address.
Click
Configure to send this configuration to the device, or Refresh to update the information.