Owner's Manual

402
- Banner —The system’s banner.
-
Current Date / Time —The system’s date and time.
Click
Configure to send this configuration to the device, or Refresh to update the information.
Fabric -> Hardware Activation
This screen lets you activate the switch and/or individual ports on the selected equipment.
Figure 13-2. Fabric -> Hardware Activation
Check the Enable Switch checkbox to activate the entire switch. Select a listed port and click Edit
to enable/disable the individual port in the lowest panel with the
Enable checkbox. Click Apply to
accept your edits, or
Cancel to abandon them.
Click
Configure to send this configuration to the device, or Refresh to update the information.