Owner's Manual

401
Dell PowerConnect B-Series Device Driver
This driver lets you discover and manage Dell PowerConnect B-Series devices on your network.
Supported Powerconnect B-series systems include the following models: B-MLXe-4, B-MLXe-8, B-
MLXe-16, B-MLXe-16, B-DCX4S-24, B-FCX624 I/E, B-FCX648 I/E, B-FCX6xx-S, B-TurboIron, B-
RX4, B-RX8, B-RX16, B-8000/8000e, and B-DCX4. Systems also include 3800, 3850, 3900, 200E,
2014, 2016, 2040, 2024, 4100, 4900, 5000, 76000, 12000, 24000, 48000, DCX 8000e, 8000, BigIron
RX4, RX8. (See Help > About for the details of supported firmware.)
NOTE:
OpenManage Network Manager will not telnet connect to some devices if they use the factory default
password. You must set the password to something other than that default. OpenManage Network
Manager does not recognize the additional prompt asking that default password be changed each time
log in occurs.
This driver has the screens described in the following sections.
Fabric -> System
This screen manages the system portion of the selected equipment’s fabric.
Figure 13-1. Fabric -> System
This screen has the following fields:
-
Name —The name of the system.
-
Location —The location of the system.
-
Contact —The system’s contact.