Owner's Manual

391

VLAN -> Bind MAC to VLAN

This screen lets you map a MAC entry to the VLAN table. After you specify the source MAC

address and the VLAN ID, the MAC to VLAN configurations are shared across all ports of the

switch. The MAC to VLAN table supports up to 128 entries.

Figure 13-129. VLAN -> Bind MAC to VLAN

You can

Add, Edit

Remove

MAC/VLAN pairs for the selected device in this screen. Click

Remove

to delete a selected, listed item. When you click

Add

(or select an existing interface listed in the

VLAN MAC Settings

portion of the screen and click

Edit

) the

VLAN MAC Editor

opens (the

lower portion of the screen) with the following fields:

MAC Address

—The MAC address to map to the selected VLAN.

Bind to VLAN

—The VLAN number (1 - 4093) to which this MAC is bound.

Click

Apply

to accept the edits you have configured and add it to the list.

Cancel

abandons your

edits.

Click

Configure

to send any altered configuration to the device. Click

Refresh

to renew the device

information on this screen.