Owner's Manual

389
VLAN -> Interface Settings
This screen manages VLAN interface settings if the selected device support them.
Figure 13-127. VLAN -> Interface Settings
You can Edit VLAN interface settings for the selected device in this screen. Click Remove to delete
a selected, listed item. When you select an existing interface listed in the
VLAN Interface Settings
portion of the screen and click
Edit , the VLAN Interface Editor opens (the lower portion of the
screen) with the following fields:
-
Interface Name —A read-only reminder of which interface you are editing.
-
VLAN Mode— Select the mode from the pick list. Possible values are: General , Access and
Tr u n k .
-
PVID —(1-4093)| 4095. Assigns a VLAN ID to untagged packets. The possible values are 1-4093
| 4095.
-
Frame Type —Specifies frame type accepted on the port. Default is Admit Tag Only . Possible
values are:
Admit Tag only and Admit All .
-
Ingress Filtering —Enables or disables Ingress filtering on the port. Ingress filtering discards
frames where the VLAN tag does not match the port VLAN membership.
Click
Apply to accept the edits you have configured and add it to the list. Cancel abandons your
edits.
Click
Configure to send any altered configuration to the device. Click Refresh to renew the device
information on this screen.