Owner's Manual

388
VLAN -> Protocol Port
The Protocol Port page adds interfaces to Protocol groups. For more information about protocol
filtering, see VLAN -> Protocol Group on page 386.
Figure 13-126. VLAN Protocol Port
Yo u c an Add, Edit or Remove Protocol Port settings for the selected device in this screen. Click
Remove to delete a selected, listed item. When you click Add (or select an existing interface listed
in the
Protocol Port Settings portion of the screen and click Edit ) the Protocol Port Editor opens
(the lower portion of the screen) with the following fields:
-
Interface —Port or LAG number added to a protocol group.
-
Group ID —Protocol group ID to which the interface is added. Protocol group IDs are defined in
the VLAN -> Protocol Group screen.
-
VLAN ID (1-4095)—Attaches the interface to a user-defined VLAN ID. Protocol ports can
either be attached to a VLAN ID.
NOTE:
VLAN 4095 is the discard VLAN. Also: You can define Protocol ports only on ports that are defined as
General in the screen described in Advanced -> VLAN Management on page 295. If you do not see that
option then you must register the license file for this feature to appear.
Click Apply to accept the edits you have configured and add it to the list. Cancel abandons your
edits.
Click
Configure to send any altered configuration to the device. Click Refresh to renew the device
information on this screen.