Owner's Manual

384
Click Apply to accept the edits you have configured and add it to the list. Cancel abandons your
edits. Click
Configure to send any altered configuration to the device. Click Refresh to renew the
device information on this screen.
Copy Files
You can copy and delete files from the Copy Files screen.
Figure 13-123. Copy Files
After a configuration change use this screen to copy running to startup config. The screen includes
the following fields:
-
Copy Configuration —When selected, copies either the Running Configuration, Startup
Configuration
or Backup Configuration files. Select possible values in the pick lists below
(disabled if you select
Restore Configuration Factory Defaults ):
Source—Copies either the Running Configuration, Startup Configuration or Backup Con-
figuration files.
Destination—The file to which the Startup Configuration or Backup Configuration file is
copied.
- Restore Configuration Factory Defaults —When selected, specifies that the factory
configuration default files should be reset. When unselected, maintains the current
configuration settings.
-
New File Name —On some (34xx) switch models, this checkbox and field appears. Check to
activate and then fill in the new file name.