Owner's Manual

383
Up—The SNTP server is currently operating normally.
Down—The SNTP server is currently not operating normally.
Unknown—The SNTP server status is currently unknown.
- Last Response —The last time a response was received from the SNTP server.
-
Offset —Timestamp difference between the device local clock and the acquired time from the
SNTP server.
-
Delay —The amount of time it takes to reach the SNTP server.
Click
Apply to accept the server you have configured and add it to the list. Cancel abandons your
edits.
Click
Configure to send any altered configuration to the device. Click Refresh to renew the device
information on this screen.
SNTP -> Interface Settings
The SNTP Interface settings screen contains fields for setting SNTP on different interfaces.
Figure 13-122. SNTP Interfaces
Yo u c an Add, Edit or Remove SNTP interfaces for the selected device in this screen. Click Remove
to delete a selected, listed item. When you click
Add (or select an existing interface listed in the
SNTP Interface Settings portion of the screen and click Edit ) the SNTP Interface Editor opens
(the lower portion of the screen) with the following fields:
The screen includes the following fields:
-
Interface —Contains an interface list on which SNTP can be enabled.
-
State Enabled —Check this box to enable the interface.