Owner's Manual

381
SNTP -> Authentication
This screen lets you create authentications for SNTP.
Figure 13-120. SNTP Authentication
- SNTP Authentication —When checked, this enables authenticating an SNTP session between
the device and an SNTP server.
Click
Remove to delete a selected, listed item. You can Add, Edit or Remove SNTP authentications
for the selected device in this screen. When you click
Add (or select an existing authentication
listed in the
Authentication Key Settings portion of the screen and click Edit ) the SNTP
Authentication Editor
opens (the lower portion of the screen) with the following fields:
-
Encryption Key ID —This defines the Key Identification that authenticates the SNTP server and
device. The field value is up-to 4294967295characters.
-
Authentication Key (1-8 Characters)—The key for authentication.
-
Trusted Key —Checked, indicates this is the Encryption Key that authenticates the SNTP server.
Click
Apply to accept the authentication you have configured and add it to the list. Cancel
abandons your edits.
CAUTION:
Duplicate Authentication Key entries are not allowed.
Click Configure to send any altered configuration to the device. Click Refresh to renew the device
information on this screen.