Owner's Manual

372

Other—The DST definitions are user-defined based on the device locality. If Other is

selected, you must define the From and To fields that appear with this selection. For

example, DST begins on the 25th October 2007 5:00 am, the two From fields will be

25Oct07 and 5:00.

Recurring Enabled—Check this to enable a recurring daylight savings time. Use the pick

lists to configure the Date fields that appear above the Time fields.

Time Set Offset (min)

—(1-1440) For non USA and European countries, the amount of time for

DST can be set in minutes. The default time is 60 minutes.

Click

Configure

to send any altered configuration to the device. Click

Refresh

to renew the device

information on this screen.

Advanced Settings

The the Advanced Settings page contains a link for configuring global advanced settings. This

screen varies slightly, depending on the device.

Figure 13-114. Advanced Settings

The page includes the following fields:

Max Log Entries

(20-400)—The maximum number of RAM Log entries. When the Log entries

are full, the log is cleared and the Log file restarts.

Jumbo Frames

—Enables or disables the Jumbo Frames feature. Jumbo Frames allow identical

data transport data in fewer frames. This ensures less overhead, lower processing time, and

fewer interrupts.