Owner's Manual

369
VRRF Settings
- Index —the ifIndex (assigned by the device) of the interface (port/LAG/VLAN) selected to
associate a virtual router.
-
Interface Name —A unique identifier for the particular interfaces.
BOOTP / DHCP Relay
This screen manages Bootp and DHCP relay settings for the selected device.
Figure 13-111. BOOTP / DHCP Relay
This screen has the following fields:
-
Maximum Hop Count —Enter the maximum number of hops. This is the maximum number of
hops a client request can take before being discarded. It can be an integer from 1 to 16. The
default value is 4.
-
Server IP Address —Enter either the IP address of the BOOTP/DHCP server or the IP address of
the next BOOTP/DHCP Relay Agent.
-
Admin Mode —Select Enable or Disable from the pick list. Selecting Enable forwards BOOTP/
DHCP requests to the IP address entered in the
Server IP Address field.
-
Minimum Wait Time (Sec) —Enter a time in seconds. This value is compared to the time stamp
in the client's request packets, which should represent the time since the client was powered
up. Packets are only forwarded when the time stamp exceeds the minimum wait time.
-
Circuit ID Option Mode —Select Enable or Disable from the pick list. If you select Enable , the
relay agent adds Option 82 header packets to the DHCP Request packets before forwarding
them to the server, and strips them off while forwarding the responses to the client.