Owner's Manual

356
Community VLANs
Enter a community VLAN number in the field under Add Community VLAN , then click Add to
list one here. You can also select a listed VLAN and click
Remove to delete it from the list.
NOTE:
Private VLANs only appear on some devices.
Click Configure to send any altered configuration to the device. Click Refresh to renew the device
information on this screen.
Port Mirroring
Port mirroring monitors and mirrors network traffic by forwarding copies of incoming and outgoing
packets from monitored port to a monitoring port. Port Mirroring settings are found at the Port
level within the Reference Tree.
Figure 13-104. Port Mirroring
Port mirroring is configured by selecting a specific port to copy all packets, and different ports from
which the packets copied. Click
Remove to delete a selected, listed item. The following rules apply:
Before configuring Port Mirroring, note the following:
• Monitored port cannot operate faster than the monitoring port.
• All the RX/TX packets should be monitored to the same port.
• The Destination port cannot be configured as a source port.
• Source Ports cannot be configured as a destination port.
• Destination port cannot be a LAG member.
• Source Ports cannot be a LAG member.