Owner's Manual

353
iSCSI -> Target
This screen displays the iSCSI target settings for the selected device.
Figure 13-101. iSCSI -> Target
Click Remove to delete a selected, listed item. You can Edit target settings for the selected device in
this screen. Click
Add to create a new setting, or select an existing setting listed in the upper
portion of the screen and click
Edit the editor opens (the lower portion of the screen) with the
following fields:
-
IP Address —The address of the iSCSI target. The IP address 0.0.0.0 is Any IP Address.
-
Port —The TCP port of the iSCSI target.
-
Name —The name of the iSCSI target.
Click
Apply to accept your edits, or Cancel to abandon them. Click Configure to send any altered
configuration to the device. Click
Refresh to renew the device information on this screen.