Owner's Manual

351
- Management Preference —Determines whether this unit is capable of becoming the master
switch. If the value is set to zero then the unit cannot support the Master Switch function. A
higher value means that the unit is more desirable than another unit with lower value for
running the management function. The device manufacturer sets the initial value of this
field.
-
Expected Code Type —The release number and version number of the code expected.
iSCSI -> Global
This screen configures global settings for iSCSI on the selected device.
Figure 13-99. iSCSI -> Global
This screen contains the following fields and checkboxes:
-
iSCSI Status — Whether iSCSI Optimization is enabled on the device. The default value is
enabled.
-
Classification — Use the radio buttons to select between CoS or DSCP . Select a number from
the pick list to the right of the selected button.
-
Remark —Whether iSCSI remarks are enabled on the device. (Select from the pick list)
-
Aging Time —How long the device will wait after the last received frame of an iSCSI session
before deleting the session from the list. Enter
Days, Hours and Minutes.
Click Configure to send any altered configuration to the device. Click Refresh to renew the device
information on this screen.
iSCSI -> Session
The iSCSI Targets Table contains information about iSCSI targets in the network.