Owner's Manual

348

Pre Configured Model Identifier

—A 16-byte character string to identify the pre-configured

model of the selected unit.

Plugged-In Model Identifier

—A 16-byte character string to identify the plugged-in model of

the selected unit.

Switch Status

—Displays the status of the selected unit. The possible values are:

(The unit is

in place and functioning),

Unsupported

(The unit is in place, but can not function as a

member of the stack),

Code Mismatch

(The software of the switch does not match the master

unit software),

Config Mismatch

(The configuration of the switch does not match the master

unit configuration),

Not Present

(The selected unit is not present).

Firmware Version

—The version number for the firmware on the selected stack device.

Stack Management -> Stack Port Counters

This screen summarizes stack port counters for the selected device.

Figure 13-96. Stack Management -> Stack Port Counters

Select a unit to display a its stack port counter data. The screen that appears at the bottom of this

window has the following fields:

Unit

—The subordinate switch being viewed.

Interface

—The name of the interface.

Tx Data Rate (Mb/s)

—The speed at which the data is transmitted.