Owner's Manual

347
- Switch ID —Select the identifier for the unit. The maximum number of units allowed in the
stack is 8.
-
Interface —Identifies the stack interface assigned to the unit.
-
Configured Stack Mode —Indicates whether or not each unit is able to participate in the stack.
-
Running Stack Mode —Indicates whether or not each unit is actually participating in the stack.
-
Link status —Indicates whether or not the stack interface for each unit is operating.
-
Link speed (Gb/s) — Indicates the nominal speed of each unit's link.
Stack Management -> Stack Port Summary
This screen summarizes stack port configuration for the selected device.
Figure 13-95. Stack Management -> Stack Port Summary
Select a unit to display a summary of its stack port data. The screen that appears at the bottom of
this window has the following fields:
-
Unit —Select the identifier for the unit.
-
Interface —Displays whether the selected switch is configured as the Master switch (displays
Management Unit) or a normal stacking member (Unassigned). The default value for this
setting is Unassigned.