Owner's Manual

346
- Hardware Management —Management preference by hardware configuration to be considered
for selection as Management unit.
-
Admin Preference —Determines whether this unit can become the master switch. Values range
from Disable (the unit cannot support Master Switch function) to Preference 12. The higher
value means that the unit is more desirable than another unit with lower value for running
the management function.
-
Pre Configured Model Identifier —A 16-byte character string to identify the pre-configured
model of the selected unit.
-
Plugged-In Model Identifier —A 16-byte character string to identify the plugged-in model of
the selected unit.
-
Switch Status —Displays the status of the selected unit. The possible values are: OK (The unit is
in place and functioning),
Unsupported (The unit is in place, but can not function as a
member of the stack),
Code Mismatch (The software of the switch does not match the master
unit software),
Config Mismatch (The configuration of the switch does not match the master
unit configuration),
Not Present (The selected unit is not present).
-
Switch Description —80-byte data field that identifies the device.
Stack Management -> Stack Summary
This screen summarizes stack configuration for the selected device.
Figure 13-94. Stack Management -> Stack Summary
Select a unit to display a summary of its stack data. The screen that appears at the bottom of this
window has the following fields: