Owner's Manual

339
RMON -> History Control
The RMON History Control screen contains information about samples of data taken from ports.
Figure 13-89. RMON History Control
Yo u c an Edit RMON History Control settings for the selected device in this screen. Click Remove
to delete a selected, listed item. Click
Add to create a new group of settings, or select an existing
interface listed in the upper portion of the screen and click
Edit the editor opens (the lower portion
of the screen) with the following fields:
-
History Entry Number .—Entry number for the History Control Table.
-
Source Interface —Port or LAG from which the history samples were taken.
-
Sampling Interval (1-3600) —Indicates in seconds the time that samples are taken from the
ports. The possible values are 1-3600 seconds.
-
Sampling Requested —Number of samples to be saved. The default value is 50. ((1-65535)
NOTE:
A change to the number of sample is only effective after a reboot.
- Current No. of Samples in List —The current number of samples taken.
-
Owner (0-20 characters) —RMON station or user that requested the RMON information.
Click
Apply to accept the edits you have configured and add it to the list. Cancel abandons your
edits.