Manualshelf

Owner's Manual

ManualsBrandsDell ManualsSoftwareDell OpenManage Network Manager Version 4.4
331332333334335336337338339340
336
Figure 13-88. PoE
This screen has the following fields:
-
Unit No:
—Select the unit from the pick list.
Global
-
Power Status
—A read-only display.
On/Off
indicates that the power supply unit is/is not
functioning.
Faulty
indicates that the power supply unit is functioning, but an error has
occurred. For example, a power overload or a short circuit.
-
Nominal Power
—A read-only display. Indicates the actual amount of power the device can
supply. The field value appears in Watts.
-
Consumed Power
—A read-only display. Indicates the amount of the power used by the device.
The field value appears in Watts.
-
System Usage Threshold
—Enter the percentage of power consumed before an alarm is
generated. The field value is 1-99 percent. The default is 95 percent.