Owner's Manual

330
Voice VLAN
This screen manages SNMP voice VLAN for the selected device.
Figure 13-82. Voice VLAN
Check the Voice VLAN Admin Mode (Enabled) checkbox to enable Voice VLAN administration.
Click
Edit on one of the listed interfaces to edit its settings in the lowest panel. Click Apply to
accept your edits (or
Cancel to abandon them). The following fields appear in the settings editor:
-
Interface —A read-only reminder of the interface you are editing.
-
Voice VLAN Interface mode —Select the interface mode from the pick list. Disable is the
default value.
None allows the IP phone to use its own configuration to send untagged voice
traffic.
VLAN ID means enter the Voice Vlan Id within the range of 1 to 4093. dot1p
configures Voice Vlan 802.1p priority tagging for voice traffic. Priorities range from 0 to 7.
Untagged configures the phone to send untagged voice traffic.
-
VLAN ID —Enter an identifier for the VLAN.
-
CoS override mode —Check to override CoS settings for this interface.
Click
Configure to implement your edits; Refresh to re-query the database for updates.