Owner's Manual

314
Disable–Indicates that LLDP is disabled on the port.
Select from the pick list.
- Notifications Enabled —Check to enable. Unchecked indicates that the device LLDP
advertisement settings are disabled, and LLDP advertisement settings are user defined. This
is the default value.
-
Transmit Management Information —Check to enables transmission of management address
instance.
-
System Name —Check to enable advertising the system name.
-
System Description —Check to enable advertising this.
-
System Capacity —Check to enable advertising this.
-
Port Description —Check to enable advertising this.
Click
Apply to accept your edits, or Cancel to abandon them. Click Configure to send any altered
configuration to the device. Click
Refresh to renew the device information on this screen.
LLDP Remote Settings
This screen displays LLDP remote settings for the selected device.
Figure 13-72. LLDP Remote Settings
Select a row displayed at the top of this screen and its data appears below:
-
Device ID —Displays the neighbor’s Device ID.
-
System Name —Displays the neighbor’s System Name.