Owner's Manual

301
DHCP IP Interface Parameters
The DHCP IP Interface screen configures the DHCP clients connected to the 34xx switch module.
Figure 13-59. DHCP IP Parameters
You can Edit DHCP IP Interface settings for the selected device in this screen. When you select an
existing interface listed in the upper portion of the screen and click
Edit the Editor opens (the
lower portion of the screen) with the following fields:
-
Interface —Choose the specific interface connected to the switch module -Port, LAG, or VLAN.
-
Host Name —The system name. This field can contain up to 20 characters.
Click
Apply to accept the edits you have configured and add it to the list. Cancel abandons your
edits.
Click
Configure to send any altered configuration to the device. Click Refresh to renew the device
information on this screen.