Owner's Manual

291
Fields for switches other than 5324 / 5316
- IGMP Enabled —Checkbox.
-
Act as IGMP Querier —Checkbox.
-
IGMP Query Count —Valid Values: 2 - 10
-
IGMP Query Interval —Valid Values: 60 - 125
-
IGMP Report Delay —Valid Values: 5 - 30
-
IGMP Query Timeout —Valid Values: 300 - 500
-
IGMP Version —Select from pick list.
Fields for 5324 / 5316 switches
Click Remove to delete a selected, listed setting. Click Add (or select an existing setting and click
Edit ) to open the editor in the bottom panel. Click Apply to accept your edits (and list the settings
in the top of the screen), or
Cancel to abandon them. The editor has the following fields:
-
VLAN ID —A read-only field displaying the VLAN ID for the selected item.
-
IGMP Snooping Enabled —Check to enable.
-
Auto-Learn Enabled —Check to enable.
-
Host Timeout (seconds) —Enter a timeout.
-
Multicast Router Timeout (seconds) —Enter a timeout.
Leave Timeout
- Timeout (seconds) —Enter a timeout.
-
Immediate Leave —Select this radio button for immediate leaving.
The
Configure button at the bottom of this screen sends the selected configuration to the device.
The
Refresh button queries to update information displayed.