Owner's Manual

286
The Configure button at the bottom of this screen sends the selected configuration to the device.
The
Refresh button queries to update information displayed.
Multicast -> Multicast Settings
If you want to assign a multicast IP to a VLAN, you must know the ports associated with the
VLAN. When you select a VLAN ID, the Available Ports (left select panel) dynamically changes
showing the user the ports currently assigned to this VLAN. This makes it easy to quickly add a
multicast address. An intuitive error validation against the multicast IP Address makes a dialog
appear showing the acceptable multicast ranges and what addresses are reserved (not allowed to be
set on the network equipment).
The following screen is for all supported Dell equipment. The lowest panel is blank, and the
Add,
Edit
, Remove buttons are active when you select an address. If you click Add or select one and click
Edit, the editor (lower) panel appears with the fields for the address described below.