Owner's Manual

275
- Minimum Bandwidth —Enter a percentage of the maximum negotiated bandwidth for the port.
Specify a percentage from 0 to 100, in increments of 5.
-
Scheduler Type —Select the scheduler with the pick list. This selects the type of queue
processing. Options are
Weighted and Strict . Defining on a per-queue basis lets you create the
desired service characteristics for different types of traffic.
Weighted round robin associates a
weight to each queue. This is the default.
Strict services traffic with the highest priority on a
queue first.
-
Queue Management Type —Displays the type of packet management used for all packets, which
is
Ta il d ro p . All packets on a queue are safe until congestion occurs. At this point, any
additional packets queued are dropped
-
Restore Defaults —Restores the default interface shaping rate to the selected interfaces when
checked.
QOS -> DSCP Mapping
This resembles part of the functions described in Class of Service -> IP Precedence/DSCP on page
270. See that topic for a description of its functions.
Figure 13-38. QOS -> DSCP Mapping