Owner's Manual

274
- Priority —This displays the priority value for which you can configure an action ( drop/no-drop ) on
the selected interface.
NOTE:
The No Drop policy can only be applied to two Priorities at any time.
Click Apply to accept your edits, or Cancel to abandon them for the selected port.
QOS -> CoS Interface
This screen lets you configure CoS for interfaces.
Figure 13-37. QOS -> CoS Interface
It contains the following fields:
-
Interface Type —Select either Port, LAG or Global with the radio buttons. This selects the
interface(s) to which the class of service configuration is applied. Global applies the class of
configuration to all the interfaces
-
Interface —Select the interface with the pick list. This specifies the Unit/Port, LAG or Global
that is being configured.
-
Interface Shaping Rate —Select the interface with the pick list.
-
Queue —Select the queue to be configured from the pick list.