Owner's Manual

269
Class of Service -> IP Port Priority
Use this screen to set the IP Port priority for your device.
Figure 13-32. Class of Service -> IP Port Priority
If you enable IP port priority with the checkbox at the top of this screen, you can add or edit a TCP/
UDP port and assign it a class of service priority in this screen. Use the
Add, Edit and Remove
buttons to manage configured ports in the table. When you select
Add or Edit , the editor appears
below the table. It has the following fields:
-
IP Port Number (TCP/UDP) —Enter the port number
-
Use Common Port — Check to enable the pick list where you can select a common type of port
(
FTP-21, HTTP - 80 , and so on).
-
Class of Service Value —Enter a Class of Service number.
Click
Configure to send any altered configuration to the device. Click Refresh to renew the device
information on this screen.