Owner's Manual

261
Instance Settings
To add instances, click Add (or click Edit to modify an existing, selected instance). You can delete a
listed instance by selecting it, then clicking
Remove . Click Apply to accept the edits you have
configured and add it to the list.
Cancel abandons your edits. If you are editing an instance, the
following appears:
Instance Details
- Instance ID —Specifies the ID of the spanning tree instance. The field range is 1-15.
-
Bridge Priority (0-61440) —Specifies the device priority for the selected spanning tree instance.
-
Included VLANs — Maps the selected VLANs to the selected instance. Every VLAN belongs to
one instance only. Enter a VLAN in the field above the list, then click
Add . Select one, then
click
Remove to delete it.
-
Designated Root Bridge ID —Indicates the ID of the bridge with the lowest path cost.
-
Root Port —Indicates the root port of the selected instance.
-
Root Path Cost —Indicates the path cost of the selected instance.
-
Bridge ID —Indicates the bridge ID of the selected instance.
-
Remaining Hops —Indicates the number of hops remaining to the next destination.
Click
Configure to send any altered configuration to the device. Click Refresh to renew the device
information on this screen.