Owner's Manual

250
The following are checkboxes that can appear on this screen:
-
Broadcast Control Enabled
- Unicast Control Enabled
- Multicast Control Enabled
- Rate Threshold (frames/second) —Select from options available on the pick list, or type a figure
in the text field (the tooltip specifies a valid range), depending on the device. If more than
one of these fields appears in the screen, a label describes the device for which the threshold
applies. This field has unique ranges per families of equipment.
-
Multicast Rate Threshold (frames/second) —When this field appears, as for the Rate
Threshold
, enter a mulitcast rate threshold as a percentage of port speed.
-
Unicast Rate Threshold (frames/second) —When this field appears, as for the Rate Threshold ,
enter a unicast rate threshold as a percentage of port speed.
The
Configure button at the bottom of this screen sends the selected configuration to the device.
The
Refresh button queries to update information displayed.
Address Table -> Address Aging
This screen lets you manage IP Address aging.
Figure 13-18. Address Aging
This screen lets you edit the Aging Time (seconds) field. The Configure button at the bottom of
this screen sends the selected configuration to the device. The
Refresh button queries to update
information displayed.