Owner's Manual

243
- Confirm New Password —Encrypted password. Mandatory if password protection is enabled.
The
Configure button at the bottom of this screen sends the selected configuration to the device.
The
Refresh button queries to update information displayed.
File Management -> Copy Files
You can copy and delete files from the Copy Files screen.
Figure 13-14. Copy Files.
After a configuration change user is presented with an option to copy running to startup config.
The screen includes the following fields:
-
Copy Configuration —When selected, copies either the Running Configuration, Startup
Configuration
or Backup Configuration files. Select possible values in the pick lists below
(disabled if you select
Restore Configuration Factory Defaults ):
Source—Copies either the Running Configuration, Startup Configuration or Backup Con-
figuration files.
Destination—The file to which the Startup Configuration or Backup Configuration file is
copied.
- Restore Configuration Factory Defaults —When selected, specifies that the factory
configuration default files should be reset. When unselected, maintains the current
configuration settings.
-
New File Name —On some (34xx) switch models, this checkbox and field appears. Check to
activate and then fill in the new file name.
The
Configure button at the bottom of this screen sends the selected configuration to the device.
The
Refresh button queries to update information displayed.
Port Based Authentication
The Port Based Authentication screen for the 53xx switches contains fields for configuring port-
based authentication.