Owner's Manual

214 Resources
- Map —Open a topology view.
-
Direct Access —Open a telnet, SNMP or http session to the selected resource. First, respond to
the screen where you select the kind of session. After you select, a command line shell (for
Telnet Sessions), MIB viewer screen (for SNMP Sessions) or web page in a browser opens that
is connected to the device, using the associated authentication. See Direct Access Details on
page 215 for more information.
NOTE:
Devices discovered without a supporting device driver installed support Direct Access functionally with
telnet and SSHv1 (not SSHv2).
Telnet sessions are synchronous. You cannot interrupt a command in progress with another
command you send, unless you have enabled something that periodically prompts for
additional commands (for example enabling line continuation prompts).
-
Print —Create an Acrobat report of the printers displayed in the inventory (change the filter and
click
Go to change this display). You must have the free Acrobat reader installed for this to
function. See
www.adobe.com to download and install this application.
NOTE:
This report limits the number of columns to those that can fit on a single page width.
- New Group —Create a new equipment group.
-
Add to Group —Add the selected to an existing group.
-
Resync— Re-query the resource for up-to-date information.
-
Group Op —Opens the Group Operations wizard with the selected group of devices as the group.
-
Discover —Open the discovery wizard.
-
File Management— If this option is installed, this sub-menu appears. It lets you Backup,
Restore, Deploy
(firmware), view the Current Config , and Compare configurations on the
selected device
Figure 13-5. File Management Context Menu
- Event Management —Opens a submenu that includes the following: