Owner's Manual

Discovery 201

From left to right, the icons let you select all devices for discovery, unselect them, select and

unselect a single device, and change authentications. When you click

Change Authentication

, a

screen like Select Network Address(es) and Authentication(s) screen appears. Use this screen to

repair or replace invalid authentications.

All available authentications appear, with those connected to the device selected appearing

checked. You can

Add, Select Edit,

and re-order these with the buttons above the list.

If you click

Te s t

, OpenManage Network Manager tests the selected authentication on the selected

device. A green check icon appears next to working authentications, a red octagon appears next to

those that fail, the yellow triangle icon indicates partial success—an option with multiple targets

and authentications.

Figure 12-7. Testing Authentication

Click

Apply

after you have corrected or modified any invalid authentications with the

Change

Authentications

button, or click

to close this panel without modification. Notice that you

can also change ports, timeouts and retries in the existing authentications with

Edit

After you have configured what is necessary in this screen, you can click the

Back

button to return

to discovery setup (in Resource Discovery or Options) or click the Discover button.