Owner's Manual

Navigation 167
Figure 10-18. Direct Access SNMP
You can also open this screen directly from the navigation panel’s MIB Browser icon, or from the
File -> Open -> System Services menu, and examine selected MIBs there.
This screen displays available MIBs in the upper left corner. Click
Add to load any additional MIBs.
Select a listed MIB, and a tree of its nodes appear in the lower left corner. The selected node’s
description appears in the right panels. Check the
Show Oids checkbox below this left screen, and
the OIDs for each MIB Node appear to the right of the name in the tree display. The display of
node details on the right has the following fields and sections (including the OIDs):
MIB Tab
This screen displays the MIB information for the Description, Contact, Organization, Comments
and
Revisions of the selected MIB. The bottom of this screen displays available Description,
Comments, Notification Variables,
and Valid Values for the selected MIB node. ( Comments,
Notification Variables,
and Valid Values accompany this MIB tab.)
The
Description area includes the Name, OID (object identifier), Type, Status, Syntax, and type of
Access (for example: read-only), in addition to a text description area. Some MIB nodes may also
display name/value pairs in the lowest part of this tab.