Owner's Manual

158 Navigation
Figure 10-8. Quick Group
As described above, you can click the left two icons above the attribute panel to add or remove a
selected attribute from the displayed columns in the list of equipment. You can also drag an
attribute name to the list to display it there as a column.
The two icons on the right above the attribute panel let you display groups (or un-group displays)
of devices based on the attributes selected. When you select Quick Group attributes, those names
appear in a panel to the left of the list of equipment. Click on an attribute value in that right panel
to display the devices with this value. For example, devices whose last alarm is
Informational
appear when you click that attribute value in the left panel. If you select all values—or none—all
devices appear, provided they conform to the filter selected at the top of this screen.
NOTE:
The filtered view and Max Items number limit the devices you can Quick Group together. You must click
Go after you revise either the filter or Max Items before applying a Quick Group to a revised list.
You do not need to leave the attribute panel open to use the Quick Group panel on the left. Click
the minus (-) icon at the top right of this screen to close the attribute panel.
Filtering and Searching
Filters appear at the top of most managers. A filter like Name Like * displays all items ( <unique
ID> like / equals / begins with *
is the typical default). Manipulate the pick lists to create more
restrictive filters.
Figure 10-9. Filter