Users Guide

Device inventory
You can view the following device inventory information of a server (iDRAC connection) or an OpenManage Essentials —
managed device.
Table 1. Device inventory
Information Description
Power State Displays the power status of the device
IP Address If this server was added individually, this value is the IP address used to connect to the iDRAC. If this
device is discovered through OpenManage Essentials, there could be multiple IP addresses associated with
the device
Service Tag The service tag associated with the device
Device Type Displays the type of device
Device Model The device model
CPUs The processor model, number of processors, and number of cores
Memory Total system memory in the server
Operating System The name of the operating system. This may require OpenManage Server Administrator (OMSA) to be
installed on the system
Host name The host name of the server
NOTE: Not all details are available for all managed devices.
Viewing iDRAC details in web browser
To view the iDRAC details in the web browser
1.
On the iDRAC details screen, tap the
symbol.
2. Tap View in browser.
3. The iDRAC details will be displayed in the device browser.
Performing power control operations on an iDRAC
To perform power control operations on an iDRAC:
1. On the OpenManage Mobile home screen, tap the appropriate iDRAC server.
2. Tap .
The iDRAC Configuration screen is displayed.
3. Tap Power Options.
The supported power control operations are displayed.
Managing iDRAC
29