Users Guide

Figure 16. Adding multiple iDRACs

The process of adding multiple iDRACs is initiated. You can check the status of the process in the task manager.

Adding an iDRAC using iDRAC Quick Sync Read

The iDRAC Quick Sync Read feature enables your mobile device to act as a proximity reader to read data from your server when

the device is in contact with the iDRAC Quick Sync Bezel.

NOTE:

For the latest bug fixes, we recommend upgrading your iDRAC firmware. For more information about upgrading the

iDRAC firmware see, iDRAC User’s Guide.

NOTE: This feature is applicable only for Dell’s 13th generation of PowerEdge servers with the iDRAC Quick Sync Bezel.

NOTE: Reading iDRAC information via Quick Sync is not password protected. Making configuration changes via iDRAC

Quick Sync requires iDRAC credentials with appropriate permission.

To add an iDRAC using iDRAC Quick Sync Read:

1. Start OpenManage Mobile.

2. If applicable, type the OpenManage Mobile Password and tap Login.

The OpenManage Mobile homescreen is displayed.

Tap the symbol.

The Add screen is displayed.

4. Select iDRAC Quick Sync Read.

5. Tap Launch iDRAC Quick Sync.

Managing iDRAC