Users Guide

4. Tap iDRAC Configuration.

The iDRAC Configuration screen is displayed.

Figure 25. iDRAC configuration

5. Type Username and Password of the iDRAC in the Task Credentials section.

6. Tap Sync Now to sync.

7. Turn on the iDRAC Quick Sync Bezel.

8. Place your mobile device in contact with the iDRAC Quick Sync Bezel activation switch on your

server and hold your mobile for at least 3 seconds.

NOTE: Configuration changes may take up to a minute to apply.

Activating or deactivating the system ID LED

OpenManage Mobile allows you to identify a server by activating or deactivating the system ID LED.

To activate or deactivate the system ID LED:

1. Tap the iDRAC of the server you want to activate or deactivate the system ID LED.

2. Tap .

3. Tap System ID LED.

The Select Blink LED Timeout or Turn Off options are displayed.

4. Tap one of the following options to activate or deactivate the System ID LED:

• 4 Minutes

• Blink LED until turned off

• Blink off

Figure 26. Blink LED options