Owner's Manual

5. Type the Username and Password for the device, and then select the power control operation you

want to perform.

NOTE: The Enable All option allows you to perform a power control operation independent of

the discovery protocol. Power On operation is performed through the iDRAC and all other

power control operations are performed through the server host OS.

NOTE: For all tasks except Power On, the server needs to be discovered in addition to the

iDRAC.

6. Tap Submit.

OpenManage Mobile performs the power control operation and then displays the result of the

operation.

Performing Power Control Operations on an iDRAC

To perform power control operations on an iDRAC:

1. Select the server on which you want to the perform power control operation.

2. Tap symbol.

The supported power control operations are listed.

3. Select the power control operation you want to perform, and tap Submit.

NOTE: Shutdown OS First option is supported only for those power control operations that

support a normal shutdown of the operating system.

NOTE: The Power Options screen displays the task credentials used to add the iDRAC. If you

want to use a different user name and password for the power control operations, edit the

username and password fields.

OpenManage Mobile performs the requested power control operation and then displays the result of

the operation.