Users Guide

NOTE: Health status is not reported if Warranty Notification Threshold is disabled at OMIVV or warranty is not

collected for server.

Changing the top high Temperature Servers to Celsius

By default the temperature parameter is set to Fahrenheit. Perform the following steps to change the temperature to Celsius:

1. Launch the vRealize Operations Manager console.

2. Click Dashboards and select Dell EMC Servers Overview Dashboard.

3. Click Edit Widget at Top High Temperature Servers(Fahrenheit) tab.

The Edit Top High Temperature Servers(Fahrenheit) page is displayed.

4. At Metric tab, click Dell EMC Server System Board Inlet Temperature Sensor Metrics and select Current Reading(Celsius).

5. Click Save.

NOTE:

It may take few seconds to reflect the changes.

Dell EMC server detailed dashboard

In the Dell EMC server detailed dashboard, you can view the overall health status of the fan, battery, voltage, memory, temperature,

physical disk, power supply, and processor of the server.

Figure 2. Dell EMC Server Detailed Dashboard

1. Dell EMC Server List: Displays the servers and the details such as, Server Rollup Status, Memory Rollup Status, Battery

Rollup Status, Processor Rollup Status, Voltage Rollup Status, PSU Rollup Status, Fan Rollup Status, Temperature Rollup

Status, Storage Rollup Status, and Proactive HA. The source of Dell EMC Server List is defined as Server Metrics|Server

Rollup Status, Server Metrics|Memory Rollup Status, Server Metrics|Battery Rollup Status, Server Metrics|Processor

Rollup Status, Server Metrics|Voltage Rollup Status, Server Metrics|PSU Rollup Status, Server Metrics|Fan Rollup

Status, Server Metrics|Temperature Rollup Status,Server Metrics|Storage Rollup Status, and Server Metrics|

ProactiveHA.

2. Dell EMC Server Metric Chart: Displays the system board power consumption and energy consumption of the server for the

selected period. The source of

Dell EMC Server Metric Chart is defined as Server Extended Metrics|System Board Power

Consumption and Server Extended Metrics|Energy Consumption.

3. Dell EMC Server Relationship: Displays the relationship of the host system, servers and the associated components.

NOTE:

Battery, voltage, or the IDSDM components are not associated with a server in the relationship map. For more

information about the components, log in to the iDRAC console.

4. Dell EMC Server Top Alerts: Displays the alerts of the servers and the associated components.

5. Firmware Update Pending View: Displays the number of pending firmware updates for the server, such as number of pending

Critical Updates, Recommended Updates, and Optional Updates. The source of Firmware Update Pending View is defined as

Dell EMC Server Available Firmware Update Summary.

OpenManage Management Pack for vRealize Operations Manager