OpenManage Management Pack for vRealize Operations Manager Version 1.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2018 - 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Introduction................................................................................................................................. 4 Prerequisites...........................................................................................................................................................................4 Support Matrix.............................................................................................................................................................
1 Introduction The OpenManage Management Pack for vRealize Operations Manager allows you to monitor the health status and analyze important metrics of the Dell EMC PowerEdge servers and chassis that are managed by OpenManage Integration for VMware vCenter (OMIVV) 4.0 or later.
2 Configuring OMIVV Extended monitoring support needs to be enabled at OMIVV to configure with vROPS. To enable the extended monitoring support, perform the following steps: 1. To launch the OMIVV administration console, start a web browser and provide the https:\\ or . 2. Type the password in the Login field. 3. In the left pane, click APPLIANCE MANAGEMENT and scroll down to the EXTENDED MONITORING section. 4.
3 Installing or upgrading to OpenManage Management Pack for vRealize Operations Manager v1.2 To install or upgrade to OpenManage Management Pack for vRealize Operations Manager v1.2, perform the following steps: 1. Go to Dell.com/Support/Home. 2. In the Choose from all products section, click Software & Security. 3. In the Software & Security group box, click Virtualization Solutions. 4. To download the product, click the required product version. The Product Support page is displayed. 5.
2. Log in as an administrator. 3. Click Administration → Solutions. The Manage Solutions screen is displayed. 4. Select OpenManage Management Pack for vRealize Operations Manager, and click Configure. 5. In Manage Solution — OpenManage vRealize Operations Management Pack screen, perform the following steps: a) Instance Settings: 1. In the Display Name field, enter a name for the adapter. 2. In the Description field, enter a description. b) Basic Settings: 1.
The Manage Solutions Screen is displayed. 4. Click Management Pack Solution. 5. Select OpenManage vRealize Operations Management Pack, and then click Configure. List of adapter instances are displayed. NOTE: Clear all the alerts before removing the OMIVV adapter instance. 6. Select a required instance, and then click Delete. NOTE: You can disable the extended monitoring in OMIVV after deleting the instance(s).
4 Troubleshooting • I don’t see any metrics for the HDD resource after OpenManage Management Pack for vRealize Operations Manager Version 1.2 upgrade (from 1.0). — After OpenManage Management Pack for vRealize Operations Manager Version 1.2 upgrade (from 1.0), you must Stop Collecting and Start Collecting for an adapter instance, to reflect the correct HDD metrics. In case of multiple instances, you need to perform the same task for all adapter instances.
