OpenManage Management Pack for vRealize Operations Manager Version 1.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2017 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Introduction..................................................................................................................... 4 Requirements..................................................................................................................................................................... 4 2 Configuring OMIVV.........................................................................................................
1 Introduction The OpenManage Management Pack for vRealize Operations Manager allows you to monitor the health status and analyze important metrics of the Dell PowerEdge servers and chassis that are managed by OpenManage Integration for VMware vCenter (OMIVV) 4.0 or later. Requirements Following are the requirements to install OpenManage Management Pack for vRealize Operations Manager: • Ensure that you install VMware vRealize Operations Manager (vROPS) version 6.
2 Configuring OMIVV Extended monitoring support needs to be enabled to configure with vROPS. To enable the extended monitoring support, perform the following steps: 1. To launch the OMIVV administration console, start a web browser and provide the https:\\ or . 2. Type the password in the Login field. 3. In the left pane, click APPLIANCE MANAGEMENT and scroll down to the EXTENDED MONITORING section. 4.
3 Installing OpenManage Management Pack for vRealize Operations Manager To install the OpenManage Management Pack for vRealize Operations Manager, perform the following steps: 1. Go to Dell.com/Support/Home. 2. In the View products section, click Software & Security. 3. In the Software & Security group box, click Virtualization Security. 4. To view a document, click the required product version. The Product Support page is displayed. 5. Download self-extractable .
1. In the Description field, enter a description. b. Basic Settings: 1. Type the host name, or FQDN, or IP address of the OMIVV instances. 2. To add login credentials, click 3. Provide appropriate admin (default username) credentials for authenticating with OMIVV and make sure you have an administrative privilege for authenticating with vROPS. 4. Click OK. 5. To validate the settings that you entered, click Test Connection. .
NOTE: You can disable the extended monitoring in OMIVV after deleting the instance(s).
4 Troubleshooting • Firmware metrics are not collected when the inventory runs for the first time. The firmware metrics are available from the second cycle of inventory. • While installing the adapter for the first time, all the Dell created custom icons are not associated. The icons are associated after you relogin.
