Users Guide

1. On the Home tab, click Content and the click Report.
2. Select Dell EMC Server Warranty.
3. Click Run Template and select All Objects > Dell EMC OpenManage Adapter > Dell EMC Servers Group > Dell
Servers Group.
4. Click OK.
NOTE: You can see a heat map of the Server Warranty in the Dell EMC Server Overview dashboard.
Viewing alerts
OpenManage Management Pack for vRealize Operations Manager displays any unusual events from the Dell EMC servers,
chassis and associated components as alerts. It also recommends that you perform certain steps to overcome the unusual
events. If the extended monitoring or firmware metric collection job fails for a server, a warning alert is created for that
particular server.
The following are the type of alerts:
1. Critical - Indicates that the component has either failed or failure is imminent. It requires immediate attention and may
require replacement.
2. Warning - Indicates that a probe or other monitoring device has detected a reading for the component that is exceeding the
acceptable level. The component may be functioning, but it can fail. The component may also be functioning in an impaired
state.
Warranty Metrics
Server and chassis warranty information is retrieved and displayed by OpenManage Management Pack for vRealize Operations
Manager. The service tags are used to gather warranty information about the servers and chassis. When you set up a Warranty
Expiration Notification Threshold at OMIVV, OpenManage Management pack creates a warning or critical alert based on the
threshold that has been set.
NOTE:
Warranty metrics is displayed for each PowerEdge server and chassis.
NOTE:
When there are different types of warranties for chassis and servers, alerts are created for the longest warranty peirod.
OpenManage Management Pack for vRealize Operations Manager 11